Fire Door Repairs or Replacement: How to Plan the Right Scope
A fire door inspection may identify damage, missing seals, defective closing devices, oversized gaps or problems with frames and ironmongery. The next step is not automatically to replace every door — and it is equally unwise to assume every defect can be repaired with a generic part. For a managing agent, facilities manager or building surveyor, the aim is to establish a defensible and clearly priced programme.
Translate inspection findings into a location schedule
Start with a unique reference for each door, linked to the relevant survey finding, photographs and building location. Separate the reported defect from the proposed treatment. A report noting that a closer is not operating correctly establishes a problem; it does not necessarily establish which new closer or repair method will be suitable. Record the door leaf, frame, glazing, seals, hinges, latch and closing operation as relevant to the assessment.
Consider whether a repair can be substantiated
Fire doors are assemblies, not independent interchangeable products. Suitability of a proposed repair depends on the door's design, evidence for the assembly and compatibility of the intended replacement components. Manufacturer instructions and relevant certification or assessment information may be needed. An apparently small alteration to the glazing, frame or ironmongery could change the assembly's performance. Where the original door cannot be identified or adequate evidence is unavailable, further technical investigation may be needed before the repair option can be accepted.
Know when replacement needs to be considered
Serious damage, unsuitable or unsupported alterations, defective frames or a lack of evidence for a proposed remedial method can all create circumstances in which replacement should be considered. The decision should follow a competent assessment of the particular installation and applicable fire strategy. Importantly, government guidance does not say that every existing fire door must be replaced simply because it does not meet a current specification for a new door, if it remains adequate from a fire-safety point of view.
Keep the quotation transparent
For multi-occupied buildings, ask for a door-by-door price or clearly grouped schedule. Distinguish inspection or opening-up investigations, defined remedials, complete door-set replacement and any items requiring a client decision. This is especially useful where flat entrance doors and communal fire doors are funded or recharged differently. Make allowances for restricted access, recessed doors, finishing and handover checks rather than assuming every location is identical.
Make the completion record useful
The final record should identify what was carried out at each door, the components used and relevant evidence, how door operation was checked, and which defects remain open. A repair should not be treated as accepted solely because the door looks better.
OD Restoration provides fire door surveys, repairs, remedials and installation services. We can review an existing schedule and help plan a practical programme for managed buildings and commercial premises across London and the South East.
Discuss Fire Door Remedials or Replacement.
Comments